How to Replace Filters

1. Turn Off the Water

Shut off the water at the shower valve to prevent any splashing or leaks during the replacement.

---

2. Unscrew the Showerhead Base

Hold the showerhead firmly and twist the bottom section (where the filter is housed) counterclockwise.

---

3. Remove the Old Filter

Carefully pull out the used filter. Then inspect the inside for any debris or buildup and wipe it clean with a soft, damp cloth.

---

4. Insert the New Filter

Align the new replacement filter with the housing and insert it gently into place. It should fit snugly without needing to force it.

---

5. Reassemble and Test

Screw the bottom section of the showerhead back on tightly (but don’t overtighten). Turn the water back on and check for leaks. Enjoy your refreshed shower!